When operating the car, it is important to use only high-quality fuel, otherwise various kinds of impurities can cause a carburetor breakdown. It is not necessary to immediately change the failed part, you can clean it yourself.

The carburetor mechanism in working condition is able to clean itself of dirt, and the internal unit is reliably protected from the penetration of debris, but strong contaminants should be removed from time to time. You can learn about the changes in the concentration of oils by spark plugs.

In good condition, the candles are dominated by a grayish-brown hue, black formations indicate excess fuel, and when dyeing candles in a light gray color, we can talk about excess air.

List of cleaning tools

1. Instruction - is a detailed list of actions for assembling a carburetor. 2. Clean rags. It is not recommended to use rags with a long pile. 3. Cleaner in the liquid composition and in the form of aerosols. 4. A set of toothpicks or thin sticks. 5. A set of wrenches and screwdrivers. 6. Cylinder with compressed air.

For work, use cleaners designed only for working with carburetors, you should not replace them with cheaper fluids of dubious quality. It is strictly forbidden to use WD-40 on an oil basis.

Instructions for use cleaner

With the right approach, the cleaner will help remove carbon deposits from throttle valves, air and fuel jets, carburetor channels, idling mechanism. This tool helps to restore the original characteristics of the mechanism, as well as reduce fuel consumption during operation of the vehicle. It is recommended to clean the carburetor when reaching a run of 5-7 thousand km.

See also: Ways to increase the power of cars

Cleaning the carburetor is performed as follows:

• Disassembly of the carburetor according to the manufacturer's instructions. Particular attention should be paid to small parts, springs, screws.

• Separate parts are folded into a glass or metal container and filled with cleaner. Rubber and plastic elements are excluded from the treatment process - they can be deformed by the action of the agent. • The parts soaked in the cleaner are rinsed under running water, the remnants of dirt are cleaned with toothpicks. • It is forbidden to open the holes and valves of the carburetor, for their processing it is enough to use an aerosol or a jet of compressed air.

In order to save money on the purchase of a purifier, repeated use of the agent is allowed. As soon as all spare parts are cleaned, all that remains is to dry them and assemble them. After installation, the carburetor is adjusted according to previously set parameters.