Многие владельцы авто знакомы с таким понятием, как шпаклевка. И у многих из них возникают трудности уже в процессе подготовки своего авто к шпаклевке, обработке царапин и прочем. Постараемся ответить на все часто возникающие вопросы и наиболее подробно рассказать о самом процессе и его составляющих. Поверьте, car putty своими руками вполне под силу каждому владельцу.

Для чего необходима car putty?

Putty - this is a special material, in appearance can be in the form of powder or paste. It is widely used to eliminate car defects, dents and smearing scratches. The work may require tools such as spatulas.

They are different in size, shape and material from which they are made. And then immediately a lot of questions arise, what material is better, what size to choose, etc. This is especially true for those car owners who for the first time decided to make their car putty.

To answer all these questions, you need to determine the nature of the damage. After thorough surface treatment with water and then solvent, the nature of the deformations will be visible. This may be metal sprain, scratches, chips and other damage. If this problem is not solved immediately, then later you can get big trouble in the form of a rusting body and visible dents, spoiling the look of the car.

Surface preparation

In order to make a car putty yourself good, you need to properly prepare the surface. And, first of all, it is necessary to clean it. First, thoroughly wash the surface and remove all dirt from it. This is the first stage of cleaning. After it is necessary to treat this area with a solvent. Now you can perfectly consider the surface with all the defects located on it.

Recommended article: Solex carburetor 21083 nozzles: types and selection

At the preparation stage, it is clearly seen how much the area will be treated and how it will be necessary to puttying the surface. Now prominent corners and places with rust are clearly visible. All this needs to be processed with sandpaper to make the surface more even and homogeneous.

Car putty

Now you can do business directly. Puttying a car with your own hands (video) is a laborious, laborious process. The final result will depend on the thoroughness and correctness of the operations. If it is wrong to apply the putty, then subsequently the crack will arise again on the surface, but we do not want this.

Before applying the putty must be well stirred. Take the right amount of material with a spatula and mix the putty with the required amount of hardener. A thin layer covers the damaged area. If before the next application a layer of putty hardened, then it must be polished. And only after that the next layer is applied, etc. If the putty is not frozen, then the next layers are applied without rubbing.

As you can see, puttying a car body with your own hands is a long and laborious process. Filling is carried out until the crack is completely smeared. Then with the help of a developing powder, reveal irregularities on the surface, and rub them with an abrasive. When rubbing, try not to go beyond the edges of the treated surface. If you are not sure that it will work out, it is better to stick transparent tape along the edges, which can be easily removed afterwards.

After all these procedures, putty car body with their hands ends applying the finishing putty. Irregularities that have been identified with the help of special tools are also treated with a finishing putty. All you need to apply 2-3 layers.

Recommended article: Volvo S60 with mileage and features of its operation

Correct grinding is the key to success.

For those who will do the putty for the first time, you should pay attention to the correctness of grinding the surface. The end result of the whole process depends on it. If, after the completion of the work, irregularities remain, then it is very difficult to level them with an abrasive. So that the putty of the car body does not disappoint with its own hands, it is worth checking the grinding quality after each stage of work.

Trust your eyes in this matter is not worth it. Here you need to either feel intuitively, or check the smoothness and evenness of the surface by touch. And then the result of your work will certainly please.

But the video shows a very interesting way to putty a car with your own hands: