Burnt high beam or dipped headlights on a car on cars, today is often a common problem. It is not at all necessary to replace it yourself, without contacting the service center. Let's analyze in turn all the stages of the work being done.
Change the lamp dipped and high beam do it yourself
Lamps for dipped and main beam on the Ford Focus 2, and other brands of cars, now you can easily find in the automobile. When replacing the bulbs with a Ford Focus 2, it is better to choose a low beam lamp - H7 55w, and a high beam - H1 55w.
Need to know:
• Do not touch the glass of the new lamp. Hold the dipped or main beam lamp only by the connector.
• When installing the lamp, first insert it into the socket, and then connect the plug.
Below we will show you how to properly install the low beam lamp on the Ford Focus 2. High beam lamps are inserted in the same way (the plug is near).
lift the hood and loosen these fixing bolts
Click on the headlight latch
After pressing the headlamp latches, pull the headlamp “towards itself”
After removing the headlamp, remove the cap from the low-beam bulb (there is a high-beam cap near it)
Push the lamp connector and pull it towards you.
This is what the lamp connectors on the Ford Focus 2 look like.
Remove the burnt lampSee also: Designation on fuse diagrams of foreign cars: table
Insert a new lamp
Put the spotlight on the spot in reverse order.
Replacing light bulbs, the procedure is quite simple, so do not rush to go to the service station. You can do it.