Most motorists received a static discharge from a car. On the open part of the body, which was in contact with the body, there was a spark, which led to unpleasant sensations with tingling. Particularly amazed the body during the closing / opening of the door cars, because to make this operation is almost impossible without touching the vehicle body.

Недобросовестные водители толкали дверь ногами, что является недопустимой процедурой. При длительном таком поведении разрушается краска на поверхности, и царапается металл. В статье разберемся, why the car is beating current, и каким образом от этого избавиться.

The most popular reasons

It is customary to single out several popular causes of static discharges from a car. There are several plausible stories when the car is beating with current. They often do not depend on the model of the car or the country of the manufacturer:

• In the car seat, the driver sits and constantly rubs synthetic covers with his clothes. The charge is gradually collected on his clothes and subsequently given to the car body.
• Car has wiring problems and the body, involuntarily connected to the voltage, gives off electricity while touching it.
• Excessively dry air has the ability to concentrate a static charge, so it is advisable not to over dry it.

You can also find the theory that during the trip the car rubs against the air, gradually accumulating a charge. Under favorable conditions, it “shoots” into the nearest open part of the body of the driver or passengers. Although this method is controversial.

When using a certain type of brake pads during braking, the metal portion of the disc may also be subject to this effect. It is recommended to use any repair parts to minimize such impact only from proven manufacturers.

Ways to get rid of static in cars

A popular “treatment” of the problem is the installation of graphite-containing or aluminum strips in the back of the car, its outer part rubberized for greater flexibility. Fastening of one end is carried out to the car body, and the second is obliged to touch the earth. The design was based on the principle of a lightning rod, when excess electricity flows into the ground.

See also: How to use cold welding for metal

It may be worth changing covers for natural material. He does not have such a degree of accumulation and discharge of energy. If the effect remains, the reason is not in the covers.

In many cases, specialized antistatic spiraea rescue. Enough to handle the driver's seat and passengers to get rid of the problem. Cylinders with substance are sold in automotive stores. One capacity is enough for a long time.

To reduce the number of conductive zones, the driver is recommended to carry out regular wet cleaning of the cabin. Moisture will not allow to concentrate statics on objects. Such an environment is more rarefied than a dry atmosphere.

When the car is beating, what to do is the main question. It is also important to check the status of the wiring with a multimeter. Identified problem wires need to be replaced with new ones.

If it is not possible to identify the current source on your own, then it is necessary to contact the service station. Specialists should quickly diagnose, identify the source and eliminate the problem. Tightening the repair is not worth it, because if the trouble happened with the wiring, it can lead to the machine self-ignition.