In this review, we decided to touch upon such a vital topic for car owners as the cleaning of the carburetor VAZ 2109.

The carburetor is such a detail that requires a very careful approach and high accuracy in setting and repair.

Quite a lot has already been said about cleaning, purging and flushing carburetors, but still there remain issues related to cleaning the carburetor VAZ 2109.

There is a very good and quite detailed video on this topic. You can see it here:

Here you will learn how to clean the carburetor VAZ 2109, without spoiling anything. In the same place you will see how to blow the carburetor VAZ 2109.

To really do everything right, we will briefly tell you how to clean the carburetor VAZ 2109.

In what cases do you need to clean the carburetor VAZ 2109?

To cope with various problems and malfunctions, you need to know how to wash the carburetor VAZ 2109.

It happens that, even with a normal level in the float chamber, you are faced with a situation where the car does not want to start in any way. After going through the engine and making sure that everything is fine with it, you understand that the matter is in the carburetor. What can cause? Usually this is all sorts of blockages.

For example - in jets, or in the carburetor channels. This is unpleasant, but by no means fatal. And it is completely eliminated by improvised means.

In general, cleaning the carburetor is done using the most common gasoline, acetone, or compressed air.

How to understand that the jet is clogged?

The symptoms here are simple and clear. If you idle the engine instantly stalls, you just release the gas pedal - you can not guess for a long time. If such a nuisance has happened to you, it is necessary to clean the jet.

Recommended article: Car engine design based on the Nicolaus Otto principle.

How to do it?

• Disassemble the air filter housing.
• Now you can remove the jet itself.
• In cases where contamination is obvious, you have no other options immediately.
• With a sharp wooden stick dipped in acetone, you need to clean it very carefully. Never use metal objects for this. This is fraught with damage to surfaces.

Next comes the process of washing the carburetor VAZ 2109

The channels inside the carburetor are quite narrow. It is therefore not surprising that dirty fuel causes such unpleasant processes as clogging. Flushing is an indispensable process for improving the performance of the carburetor and maintaining it in good condition.

• Important! Never, under any circumstances, try to flush the carburetor with acetone until you completely disassemble it. Some details will just eat. They need to be removed and separately washed with gasoline.
• The sequence of actions during washing is as follows:
• First you need to carefully remove the main air jets from the body.
• After that you can get the nozzles and emulsion tubes.
• Take a screwdriver and it is very necessary to carefully remove the stopper plate of the main fuel jet plugs.
• Now you can unscrew the plugs. Now you need to check the washers installed under them. If they are damaged, they should be replaced with new ones.
• Unscrew the main fuel jets.

The important point is how to clean the carburetor VAZ 2109 - in the first and second chambers jets are different and they are very easy to confuse. Therefore, somehow mark them. This is due to the fact that their bandwidth is different.

• Now you need to start pouring fuel into the float chamber. Then you can begin to flush the emulsion wells.
• If the carburetor is very dirty, repeat the procedure two or three times.
• After all these procedures, you need to blow the nozzles with air under pressure.

Recommended article: Little Hyundai Getz in the secondary market

Thus, the carburetor VAZ 2109 is cleaned. As you can see for yourself, the process, although it requires some knowledge and skills, is in itself quite simple.