>

Almost every motorist in our area is trying to prepare his four-wheel friend for the winter to the maximum. Unpredictable weather from a positive temperature can change dramatically with a creepy “minus” with wet snow, or even rain. And in general, it is worthwhile to leave the heated car for half an hour with minus degrees - “hi” to the ice crust. As a result - icy windows, locks and the entire surface of the car. How to get out of this situation? And here every motorist already estimates possible options for himself: use of a scraper, special means or heating of the glass surface. Heated windshield is not provided in every car, and the scraper will not get rid of the problem in a matter of seconds. It remains to hope for the power of special liquids and sprays, which should help save the situation. The main thing is to choose the right defroster of glass and locks so that it does not disappoint at the most inopportune moment. We will discuss further the choice of such a tool and the possibility of using available tools.

Frozen Glass Surface Heating

Types of defrosters

There are two types of such liquids on the market. One is intended to be used as a preventative. That is, you put them on clean glass and the surface of the locks, polish well and drive quietly in the cold for a certain time. Depending on the composition and manufacturer of the ice will not freeze on the surface of the car from several days to several weeks. However, such a long period without ice crust will be possible to drive only with the condition of using a quality windshield washer.

Читать далее о правильном выборе размораживателя стекол для машины-->Другой вид размораживателей используется непосредственно для оттаивания льда уже после образования ледяной корки на поверхности. Такая жидкость для разморозки выпускается в виде спрея или обычного жидкого средства во флаконе с распылителем, который имеет более крупный размер капель. Такие средства должны сохранять свои свойства даже при очень низких температурах, однако, как показывает практика, лучше их хранить в домашних условиях, чтобы они не становились более вязкими. Некоторые спреи («ледоколы») используются также и для снятия ледяной корки с замков.

Reviews of some defrosters

First of all, we note that it is necessary to pay attention to the compositions of such funds. Car glass defroster should not contain methanol - a harmful substance whose vapors can cause blindness and poisoning or even death.

British defroster defroster CarPlan Blue Star de-icer proved to be not the best. Having stood overnight at a temperature of −10 degrees, stopped acting on the ice crust. In addition, it was very difficult to remove it from the bottle, because the tool was very thick and viscous.

CarPlan Blue Star de-icer

Slightly better held on Glass Defrosterfrom Eltrans. The bottle splashed well at −10 degrees, but after several hours in the freezer at −30 ° C, the dispenser stopped working altogether.

Glass Defrosterот Элтранс

He was able to overcome the ice crust on a car thawing American-made Gunk De-Icer. However, the spray trickle was very modest after a few hours in the cold, and the cold metal surface of the bottle burns hands unpleasantly during the application process.

Gunk De-Icer

Remained liquid glass cleaner Discounts for new cars! Profitable loan from 9.9% installments 0% adom.ru Russian-made Hi-Gear, which, however, will help to fight only with a thin ice crust. With severe frosts, the tool will be useless.

Hi-Gear

Antelope Sapfire also helps with weak freezing, and at temperatures from -10 ° C and below can only cope with a scraper.

Antelope Sapfire

Anti-ice from the company Astrohim proved to be a little better than the rest, retaining its fluidity even after a night in the garage at a minus temperature. He helped to cope with a crust of ice, but he, like the other representatives of the defrosters, could not be defeated by a thick, frozen layer.

Antelope Sapfire

Do-it-yourself defroster: truth or myth?

Agree, it is not always thawing may be at hand. But sometimes without it is almost impossible to clean the glass or lock. Is it possible to cope with a layer of ice with the help of available tools? And which of them can only harm the car?

From novice motorists you can hear the advice that hot water copes best with a layer of frost and ice. But it can not be used in any case! On the surface of the glass there are many microcracks that will be filled with warm water. When freezing the water will expand, making the microcracks wider and deeper. And in one, far from a beautiful day, one or several large and serious cracks will appear on the windshield. As a result, you will spend much more money on glass replacement than on defrosting agents. If there is an urgent need, warm water can still be used (but only as an exceptional need!), After which you must wipe the surface thoroughly dry.

Someone recommends using a hot water bottle. But this method has not gained popularity, because for one approach too small portion of glass thaws.

Glass defroster можно сделать самостоятельно

Alternatively, in the absence of a special agent, a saline solution can be used. Moisten a sponge with it and gently wipe the surface, gradually getting rid of ice. Add glycerin to the solution to slow down the process of icing the glass. You can also use gauze with salt. So dry compress should wipe the glass. And to speed up the work, the compress can be heated.

If you do not want to spend money on a ready-made defroster, you can try to cook it yourself. For the first mixture, you will need to mix glycerin and denatured alcohol in a ratio of 1:10. Dampen the cloth with the prepared solution, rub it with glass. This mixture helps the ice to thaw faster, and also prevents new icing. The main thing is to wipe the surface well with a dry cloth after being treated with this solution.

To combat a thick crust of ice, you can use the following mixture: in a small amount of ordinary dishwashing detergent, you must add pure medical alcohol. Mix everything well and pour it into the spray bottle. Ice will melt faster if you use more of this mixture.

As you can see, now there is a wide choice of all kinds of anti-icing agents on the windows and locks of a car. Only you decide - to buy ready-made or do it yourself. What kind of defroster do you prefer? Which of them will not recommend to other motorists? Share your opinion in the comments under our article!