Rating ways to save fuel on the car

>

Do you want to travel by car? Then you just need to learn how to reduce fuel consumption? Check out the ranking of the best ways to save fuel. Particularly relevant is the topic of savings when traveling abroad, where sometimes the price of fuel causes considerable surprise.

The video tells how to save fuel:

В рейтинг лучших способов экономии топлива при езде вошли методы, подразумевающие неспешную езду, отключение ненужных электроприборов, знание правильных оборотов двигателя, метод «воздушного» мешка и многое другое.Читать далее о способах экономии топлива-->

Hurry up - make people laugh!

So. The surest and most useful way to save fuel, which ranked first in the ranking, means not too fast driving. The ideal speed with which to drive is about 80 km / h.

In some modern companies engaged in long-distance transport, use special training drivers. They are introduced to the theoretical driving course, designed to change the attitude of the motorist to the speed of movement.

Riding at 80 km / h will help save fuel

Riding at 80 km / h will help save fuel

Moreover, driving at a speed of 80 km / h compared to a speed of 90 km / h will give a time difference of just four minutes.

These are not just words, but calculations made by experts from Mercedes-Benz.

So it turns out that to go at such a speed more efficiently, since it is this kind of riding that saves fuel as much as possible.

Be able to drive correctly!

The second way is second place. The right driving style. Often the victims of increased fuel consumption on the roads are either novice motorists who are just learning to drive and sharply press the gas pedal, or those who prefer an “aggressive” driving style. But eliminating the acceleration and pedal to the floor, you can significantly save on fuel. According to the drivers themselves, whose driving experience is not one year, they manage to save up to 25% of fuel by using a uniform driving style. What is it like?

To save fuel, you need to gently press the gas pedal

To save fuel, you need to gently press the gas pedal

In this case, the driving style will depend not only on the correct pressing of the gas pedal, but also on the correct transmission and the moment of its activation. This is a whole system, but it is not difficult to learn. It is important to know that the optimal interval between speeds is the range from 1500 to 3000 revolutions per minute.

Pay attention to electrical appliances!

Third place ranking. Fuel economy may also depend on electrical equipment. The more appliances in your car will be turned on, the more fuel your “iron” horse will consume.

A working air conditioner increases fuel consumption

A working air conditioner increases fuel consumption

For example, there is no need to leave the air conditioner turned on without need, which is able to pick up from 5 to 20% of consumable gasoline or heated rear window, which also takes the lion's share of fuel.

It is recommended to turn off on the road those electrical devices, in which there is no immediate need. Of course, this recommendation does not apply to the inclusion of dipped-beam headlights prescribed in the law of the Russian Federation, otherwise you will have to pay a fine.

Engine speed

Pay attention to the engine speed for an economical ride.

Discounts for new cars! Profitable loan from 9.9% installments 0% adom.ru Pay attention to the engine speed for an economical ride.

The fourth method will help you learn how to reduce fuel consumption using your own engine. In other words, you need to learn not to "turn" the motor. If you want to really save on fuel, it is not recommended to increase the engine speed more than 2000 rev / min. Also, it should, as soon as possible to shift gears. For example, that the 5th gear on a car Vaz 2112 fell at a speed of 50 km / h. On the car of this brand is a 16-valve engine, which allows you to use this mode.

Do not forget about tire pressure

Driving on lowered tires increases fuel consumption

Driving on lowered tires increases fuel consumption

Fifth place is not so common, but effective way. This is to ensure proper tire pressure. Even automobile scientists have estimated that a decrease in pressure increases fuel consumption by 2%. And tires which do not pass in due course, have not thought up yet. Therefore, it is important to monitor this matter and it is necessary to pump up the tires not only because of the safe movement, but also to save fuel. And if you notice that your tires are lowered, they must be pumped up as quickly as possible.

Adjust the gap in the candles

Spark plug clearance

Spark plug clearance

The sixth place in the ranking is taken by the economy method based on adjusting the gap in the spark plugs. This refers to the gap between the central and side electrode of the candle. So it is advisable to increase it to one millimeter to ensure the best combustion of the mixture in the cylinders.

To be precise, then immediately take up the increase in the gap is not necessary. Often enough is a simple check. And on many cars, the gap between the candles is already one millimeter. But if it is smaller, then it should be increased.

No need to carry anything extra in the trunk and on the roof

The more loaded the car, the more fuel consumption

The more loaded the car, the more fuel consumption

The load in the trunk and on the roof also affects fuel consumption. Therefore, in the trunk, it is desirable to tidy up and not to carry with them too much. The more weight, the more gasoline will be consumed. Do you need it?

The unique way of "air" bag

Following another vehicle helps save fuel.

Following another vehicle helps save fuel.

Air bag method ranks eighth in the ranking. He is a bit adventurous, but the effect is not bad. In this case, the air bag method involves following some other vehicle, trying to go as close to it as possible. Thus, you get into the zone of discharged air or the so-called "bag". It is clear that there will not be air pressure on the car, and there will be a minimum of resistance. And the less resistance, the less will be the fuel consumption.

The way to save fuel on the injection engine

fill with fuel recommended by the car manufacturer

fill with fuel recommended by the car manufacturer

As you know, the injector is much more economical than a carburetor engine. But in such engines the problem of increased fuel consumption is observed. And the ninth place in the ranking is taken by a method specifically associated with an injection engine. It implies a simple method. As they say, all ingenious is simple. If on a conventional carburettor engine 10% fuel economy depends on the quality of the fuel, then on the injector it is all 50%. Therefore, you should always in such cars to fill in such gasoline, which is recommended by the manufacturer.

In addition, you should not independently regulate the fuel system of your car. Frequently visit car service centers, where you can replace or clean all filters that become dirty over time. This is especially true of filters installed in the catalyst. Fuel consumption is most often increased due to a faulty catalyst. Remember this.

Sensors

Another way to save fuel on the car involves checking the operation of the sensors. As you know, the incorrect operation of these components leads to a violation of the correct mixing and overheating of the motor. And this, in turn, contributes to the overrun of gasoline.

Throttle Position Sensor

Throttle Position Sensor

The most common temperature sensors intake manifold and coolant. As a result, the air-fuel mixture is either too rich or too poor. And in both cases it leads not only to an excessive consumption of fuel, but also to a loss of power.

Throttle position sensors are often out of order. As a result, engine control in acceleration mode is disturbed. Also, the idle mode does not work correctly, because there are incorrect data on the perceived load.

Special attention should be paid to the sensors of incoming air and flow velocity sensors. Also in this case, the wrong amount of air or incorrect data leads to increased fuel consumption.

And, of course, oxygen sensors. They need to pay special attention. If the lambda probe fails, as this sensor is also called, it will lead to the wrong mixture formation.

Reduce fuel consumption in an automatic transmission

Save fuel on automatic transmission

Save fuel on automatic transmission

Reduce gas mileage on vehicles with automatic transmission will help timely diagnosis of the blocking box node. When it fails, the automatic transmission control unit does not allow the transition to higher gears. It is not necessary to have seven genius in the forehead to guess that this leads to increased consumption. In other words, under such a set of circumstances, the emergency operation of the automatic box is activated. That he does not allow the inclusion of transmissions above the second or third.

Don't ride in the rain if you can't!

Improper driving in the rain increases fuel consumption

Improper driving in the rain increases fuel consumption

The following method implies adverse weather conditions. In particular, for drivers who cannot ride in rainy weather, it is better to wait until the rainfall stops, sitting somewhere in a cafe, having a cup of tea. Like air resistance, water resistance under the wheels also contributes to greater fuel consumption. Therefore, the driver in such weather should avoid puddles, even the smallest. They are able to slow down the movement of the car as if someone clings to the bumper and does not allow to go further.

Do not drop the glass!

Closed windows reduce fuel consumption

Closed windows reduce fuel consumption

The next place in the ranking is the way that means driving with the windows raised. How can this affect fuel economy? And everything is simple. The lowered glasses create the turbulence of air increasing rolling resistance of the car. As a result, gas mileage increases. Although these are just some grams, but if such riding is practiced day after day, then a negative result will not take long to wait.

Clean carburetor - fuel saving

The video tells how to clean the carburetor of a car:

Which part of the car is most responsible for the consumption of gasoline? That's right, of course, the carburetor. If he has served his, it is better to replace it with a new one or clean it more often. Often a large amount of impurities and dirt lingers in the carburetor. Washing the carburetor and jets will help restore its normal operation. And this will lead to real fuel economy.

Well that's all! Is it possible to reduce fuel consumption for cars, if you know all the methods described above and use them, depending on the situation? Of course you can.

LEAVE ANSWER