>

Every driver knows firsthand about the need to use high-quality fog lamps in the car. Safety of a trip in conditions of poor visibility caused by weather conditions depends on it. This problem is especially acute in autumn and winter, when the weather is more like London - constant rains and fog. To choose the right fog lights, first you need to familiarize yourself with some of their features.

Читать дальше о том, как правильно выбрать противотуманные фары для автомобиля-->

How do foglights work?

First of all, it should be noted that with the right light, any bad weather will not be able to create any obstacles during the trip. The difference between protivotumanok from ordinary car lighting is that they allow you to expand the lighting of the latter without loss of visibility, distortion or reduction of the illuminated space.

To understand how fog lights work, you must first determine why normal lighting cannot cope with a particular stretch of road in fog or rain. In such weather, drops of water “hang” in the air, which act as a reflector of light. That is why in the bad weather in front of the car a peculiar light spot is formed, caused by the reflection of light from water. Obviously, driving here becomes extremely difficult and unsafe for all road users, not to mention driving at high speed.

Fog lights are used to prevent the driver from blinding water droplets in the air. They are installed on the bumper as close as possible to the asphalt, well below the plane of view of the driver of the car. This allows light to highlight those parts of water in the air that are as low as possible, so their glow will not interfere with normal visibility. It is also necessary to emphasize that the closer the fog is to the surface of the earth, the less its density, and, consequently, the less water droplets it contains. The less water - the less glow.

Modern manufacturers protivotumanok allow for better lighting of the road, not only in poor visibility due to bad weather, but at any other time. A wide luminous flux protivotumanok will be the first assistant when performing a sharp turn or when parking (help illuminate curb, for example). Also, some manufacturers equip their cars protivotumanok systems that change the angle of illumination when turning the steering wheel - this will be especially useful when making sharp turns or maneuvers at high speed.

How to choose fog lights

So, if fog lights are not provided for your iron horse, then you should pay particular attention to their choice, since this accessory is required in countries where frequent rain or fog is a common phenomenon (this is our country).

What kind of light fog is better - yellow or white? Experts say that for our region it is preferable to use fog lights with a yellow glow. Why? Yellow light has a longer wavelength than, say, popular today xenon. Modern car manufacturers rarely use fog lamps with temperatures above 4.5 thousand Kelvin. At a higher rate, a driver in low visibility on the road will see only a bright glow. Also, this effect can be achieved simply by installing special filters on the basic fog lamps (they minimize the shortwave range of blue light). Experts recommend the use of headlights with a temperature of 2.5–3 thousand Kelvin.

If the fog is not installed by the manufacturer

If your car is not installed fog lighting system Discounts for new cars! Profitable loan from 9.9% installments 0% adom.ru (unfortunately, today it is quite common that reduces the final cost of the product), they need to be purchased separately.

The first thing you can do is purchase daytime running lights for your car. This is the most popular method, since it will not violate the aesthetic component of the car. When installing daytime running lights, a special switch is mounted in the cabin that allows you to adjust the headlights in the complex.

You can also choose aftermarket lighting. In this case, you need to pay attention to a few highlights.

Diffuser glass. It can be made of glass or plastic. Experts recommend using lights with a glass diffuser, because it has a higher conductivity of light. The only drawback - the fragility of the glass compared with plastic. Plastic diffusers illuminate the road worse, but are more resistant to mechanical damage.

In any case, the diffuser should be dense and have a thick base. After all, the headlights are attached as close as possible to the road surface, which makes them very vulnerable to damage.

Next, you need to pay attention to the reflector. In high-quality fog lamps it should be a separate part that can be easily replaced. Also an important selection criterion is the headlight body - it should be thick and durable. And so that it can be easily removed, disassembled and replaced with any spare part.

Last but not least, when choosing a fog light, pay attention to the fastening parts. The headlamp should not dangle, and should also be able to adjust the lighting in several planes.

As you can see, the choice of fog lights should be approached with special attention, because not only your life will depend on this, but also the lives of your passengers and other road users. If you already have experience choosing and installing fog lights, share your comments under this article.