You are the proud owner of the Audi 80 B3 and would like to make it special? There is a desire to change something, but you do not know where to start? Then you should read this article completely to do everything at the highest level.

How to start tuning Audi 80?

First of all, the car should be brought to a normal state. Since it is already old, and, for sure, the engine is dirty, the chassis is not at its best, and the body can be scratched or rusty. Start with a fix with major flaws, and only then proceed to tuning the Audi 80.

Still, it would be strange to install, for example, a body kit on a car that is about to collapse. Repair it properly, and then do the tuning of the Audi 80 B4, for example. By the way, at this stage you can choose new wheels and tires. We recommend to see the photo of the Audi 80 tuning, in order to understand what you want to get as a result of your car.

How to increase the power of the engine Audi 80?

There are several options that will increase engine power. For example, you can change the cylinder head by taking it from a Golf 2 9A, Golf 2 KR or Golf 3 ABF. And the first option is preferable, although it is more difficult to find. But in this case there will be confidence that the tuning of the Audi 80 B3 is excellent.

After that - you can convert the carburetor engine into an injection one. If desired, you can squander the cylinders so that the total volume is two liters. All these improvements will bring the power to one hundred and fifty horsepower.

Recommended article: Volkswagen Amarok pickup is reliable and inexpensive for a huge SUV

By the way, be sure to change the intake and exhaust systems. And in this case it is better to consult with the masters in order to make everything right. Motor power will be more, as a result, the factory brakes will not be able to cope with it, so replace the rear brakes with disc brakes, which does not require high costs.

Tuning grille Audi 80

On many Audi 80 tuning (photo above), you can see that motorists pay a lot of attention to tuning the grille. To make it, cut the entire inside of the old grille, leaving the frame. Cut the blade hacksaw. Put on the drill a special nozzle and remove the irregularities. Do not forget to remove the paint to plastic.

The next step for you will be the purchase of a new grid for tuning, degreasing wipes, putty and black paint for plastic. Grind the frame, and then - carefully zashpatlyuyte it to level the surface. When the putty dries, sand the frame.

At the top of the frame on the remnants of the ribs, which held the middle part, make cuts into which and insert a new grid. Paint the frame with two or three coats of paint. Fit the grille to the frame size, insert it into the cuts and fix it from the bottom with wire, just bend and cut off the excess on the sides. After all these manipulations, the grille will be ready, and it can be put in place.

Noise Isolation Audi 80

Since the car can not be called new, its body, for sure, rattles while driving, and the engine is also audible. For soundproofing, you can use a vibration damper and a sound absorber. And on this tuning with your own hands, the Audi 80 can be considered completely finished.

Recommended article: Volkswagen Passat B8: Is the road to success long?

On those photos of tuning the Audi 80 B4 that are presented in the material, it is clear that you can do anything with the car: you can change the cabriolet and the doors completely, and do the body kits like you want, giving it a more predatory look, and much more what fantasy tells you. And yet - some options for tuning you can see in the following videos. Successful alterations to you!